Search

Home > Knowledge > Content
Introduction of common method of filling tire
May 07, 2018

According to the damage degree of the tire, the method can be divided into three types: cold filling (internal filling or pasting), hot filling (commonly known as fire repair) and adhesive strip method. Now let's talk about what's different about each of these.

The so-called cold repair is to remove the injured tire from the rim, and after finding the wound, the foreign body in the wound is cleaned, and the special rubber skin is attached to the inner layer of the tire to complete the leak. In fact, this kind of method is similar to the method of bicycle repair, but only need the special machine and the tire rubber to complete. The advantage is that it can be repaired with a larger wound, the disadvantage is not durable enough, after a period of water immersion or high-speed vehicle, the repair is likely to have a leak again.

Hot patch (commonly known as fire patching) is the most complete retread measure. The heat is also used to remove the tire from the rim and attach the special raw film to the wound. Bake the wound with a baking machine until the raw film and the tire are completely glued. The benefit of the hotfix is very durable, and there is no need to worry about a repeat leak. But it also has shortcomings, that is when the construction technology of the demand is higher, because once the baking temperature control is not good, is likely to tire sear, serious still can produce deformation, in that case, to the damage of the tire is bigger.

For a large number of car owner friends, the most simple and practical method is to use the adhesive strip method when your car is in the road when the tyre is puncture and the air leakage phenomenon occurs. Strip method of tire repair of equipment requires low (a set of tire repair tools and a small tire inflator pump), professional and technical requirements for the owner is not high (as long as you dare to try), so it's suitable for common owners.

Related Industry Knowledge