Car Tyre Inflator Tire Pump With CE Certificate ES-228
The tyre inflator is designed for car tyre, light truck tyre, bike tyre and other inflatables. It is with powerful motor, pump a standard tire from 0-2.5 bar within 5 minutes, fill tyre air only 2 minutes....
The tyre inflator is designed for car tyre, light truck tyre, bike tyre and other inflatables. It is with powerful motor, pump a standard tire from 0-2.5 bar within 5 minutes, fill tyre air only 2 minutes.
Diameter of cylinder:
Analog pressure gauge with accuracy:
Inflating time from 0 to 35PSI: (for tire R15/195/60)
Time of continuous work
Material of cord & connector:
Material of motor coil:
Length of hose:
Length of cord:
300±10cm with car cigarette lighter connector plug
1PCS nozzle adaptors; 1PC sport needle;
120 x150 x 58 mm
PP bag + Gift box + Instruction book; According to customers' requirements
Cars, motorcycles,bikes,rubber boats,sport balls etc.
As customers' design
1. Plug the power cord into the vehicle cigarette lighter socket.
2. Unscrew the tire valve cap, push the connector firmly onto the tire valve and then secure by depressing the thumb lock.
3. Start the tire inflator using the on/off switch.
4. Ensure the hose is not stretched or kinked during operation.
5.When the correct pressure has been achieved,stop the compressor by pressing the on/off switch.
6. Lift the thumb lock and release the connector from the tire valve.
7. Replace the tire valve cap.
ATTENTION IN USE *For use with 12V negative earth only. *Allow unit to cool for 10 minutes after each 15 minutes of continuous operation. *The gauge fitted to the product provides an indication of approximate pressures only.
Hot Tags: car tyre inflator tire pump with ce certificate es-228, China, suppliers, manufacturers, wholesale, buy, price